You are welcome, Sandi. Let me know how it works out. If you need any help along the way I can give you my phone # or we could Zoom.
Ken
"The dulcimer sings a sweet song."
You are welcome, Sandi. Let me know how it works out. If you need any help along the way I can give you my phone # or we could Zoom.
Ken
"The dulcimer sings a sweet song."
THANK YOU, ROBIN!!
KEN!! YOU ARE AMAZING!! That was super clear instruction, and I a think I can do it. I am so grateful for you and all of the dulcimer community, even though I have not keeping up so well. No better people on all the planet, surely! THANK YOU SO MUCH!!! 💚💚💚
Sandi, yes you can fix it yourself. You will need to replace the nut (correct name, it is not a bridge). You will need a piece of hardwood the same length, height, and thickness as the broken nut. You will then need to cut slots in the nut for the string. If I were closer, I'd do it for you. You could remove the old nut and send it to me and I could make a new one and send it back to you. It might take a couple of weeks to work it out sending between VA and PA. If you tackle it yourself, first take the old nut off of the instrument. Hold on to it as it will serve as guide for where you should cut the slots for the strings. You will need a way to cut a piece of hardwood to the size of the old nut. You might be able to take it in to a guitar store and see if they have a nut blank of the same dimensions. If the old nut is glued in you may need to knock it out. A sharp rap with a hammer may dislodge it. If that doesn't do it, try a little heat directed on the nut with a hair dryer. That may help soften the glue. Once it is out you will need to clean the slot of any glue residue using a file, chisel, or sandpaper. The next step is fitting the new nut. Then hold the nut up to the new one and mark the spaces for the string slots. Use a narrow blade saw or v shaped needle file to make the slots. Don't cut too deep or the strings will buzz from touching the frets. Put the nut back in the slot and restring the dulcimer. I don't know how clear these instructions will be to you. It is easier for me to tell it someone than it is to write it out. Let me know if you have any questions. I hope you are able to get the dulcimer into playing shape.
Oh, and I forgot to say that I think it is worth giving to someone to start learning to play mountain dulcimer.
Ken
"The dulcimer sings a sweet song."
Sandi, I have no advice on how to work on the instrument yet hope some knowledgable person chimes in!
Someone in our neighborhood's Buy Nothing group asked for a mountain dulcimer!! And I have a beat-up First Act. It needs new strings, and the top bridge is broken. Is this something I might can fix up myself that will be a worthy instrument? I sadly don't have any resources to pour into this but so desperately want to meet this request. TIA for any advice!!