Wally Venable

Location:

Location: Morgantown WV
Country: USA

My Latest Followers:

Homer Ross Ken Longfield Strumelia

Stats

images: 3
events: 1

Activity

Wally Venable
@wally-venable • yesterday • comments: 0
Posted a response to "Extended Range Dulcimer":
"My 6-string conversion of an old Korean dulcimer has a "dropped" A on the middle set and a "raised" D on the base set. Otherwise it has the common, original,..."
Wally Venable
@wally-venable • 4 days ago • comments: 0
Posted a response to "A question about intonating a dulcimer":
"I'm not at all surprised. All instruments need to be properly "set up," and this is often left to the retail seller. Amateur builders often don't know how to..."
Wally Venable
@wally-venable • 2 weeks ago • comments: 0
Posted a response to "A question about intonating a dulcimer":
"I went back to look at the photos of the spacer and fret. Someone obviously messed it up.  Frankly, if I was dealing with this, I would remove the plastic..."
Wally Venable
@wally-venable • 2 weeks ago • comments: 0
Posted a response to "A question about intonating a dulcimer":
"You don't need or want diamond files for cutting wood or plastic. I use cheap (under $5) "needle" or "jewelers" files like these...."
Wally Venable
@wally-venable • 2 weeks ago • comments: 0
Posted a response to "A question about intonating a dulcimer":
"To make the slot adjustment, I would use either a triangular needle file or perhaps a welding tip cleaning file. You can do it one string at a time by..."
Wally Venable
@wally-venable • 2 weeks ago • comments: 37
Posted a new Comment on Fret Position:
"Ooops. Wrong citation. Not Strothers. You know there is YAFCalc? Yet Another Fret Calculator..."
Wally Venable
@wally-venable • 2 weeks ago • comments: 37
Posted a new Comment on Fret Position:
"The Strothers calculator, and probably some others, allow you to get fret spacing in millimeters, 1/16 ths, and decimal inches if you input the VSL in those..."
Wally Venable
@wally-venable • 3 weeks ago • comments: 37
Posted a new Comment on Fret Position:
""Have you built baritone dulcimers?  If so did you change anything to strengthen it for the higher string load?" The Strothers String choice calculator..."
Wally Venable
@wally-venable • 3 weeks ago • comments: 37
Posted a new Comment on Fret Position:
""for a 29" VSL dulcimer, the 1# or 1.5 fret should be 4.614" from the nut ....." Life could be simpler if we specified these in millimeters, not inches. My..."
Wally Venable
@wally-venable • 3 weeks ago • comments: 37
Posted a new Comment on Fret Position:
"Use a calculator for any chromatic instrument, guitar or uke for instance, with the desired VSL. Then you will have to figure out the count for the dulcimer..."
Wally Venable
@wally-venable • 4 weeks ago • comments: 0
Posted a response to "Jean Ritchie and her ballad repertoire":
"John Knopf said "One thing I've noticed is how many of these songs dealt with disasters, death, sickness, loss of dear ones, etc." Isn't that what a lot of..."
Wally Venable
@wally-venable • one month ago • comments: 47
Posted a new Comment on Short fretboard dulcimer?:
"From your questions, it appears that you are not an experienced luthier. The instrument you have shown us is one requiring a very high skill level. Few of us..."
 / 2