Timeline Entry
@strumelia
• 4 days ago
• comments: 19
Posted a new Comment on @intelisano:
Posted a new Comment on @intelisano:
"Yes I got your message about the twisted loops... unfortunate. Hopefully the luthier can get those twisted loops off without damaging the brads underneath..."
@intelisano
• 4 days ago
• comments: 174
Posted a new Comment on @strumelia:
Posted a new Comment on @strumelia:
"I understand about the loops. However, whoever put these strings on, twisted the loops until there were no more loops. As though they would never have to be..."
@robin-thompson
• 4 days ago
• comments: 4
Posted a new Comment on After the Flood:
Posted a new Comment on After the Flood:
"@davisjames We're happy you enjoyed the tune, Jamie! If this tune called a Miles Davis tune to mind, we porch players are deeply honored, too. "
@strumelia
• 4 days ago
• comments: 19
Posted a new Comment on @intelisano:
Posted a new Comment on @intelisano:
"Remember that to remove a string you want to replace, you can also simply cut it in the middle with a wire cutter/pliers and then remove the two pieces a..."
@themusicaldabbler
• 4 days ago
• comments: 0
Posted a response to "2 dulcimer dilemma":
Posted a response to "2 dulcimer dilemma":
"Thank you for posting this. I'm also a beginner, and also happen to have 2 very similar dulcimers (though not from the same builder). I think I will do..."
@davisjames
• 4 days ago
• comments: 4
Posted a new Comment on After the Flood:
Posted a new Comment on After the Flood:
"For some reason this makes me think of Miles Davis "Kinda Blue"...Perhaps the sense of space and the modal nature of it.Geat stuff."
@john-petry
• 4 days ago
• comments: 0
Posted a response to "2 dulcimer dilemma":
Posted a response to "2 dulcimer dilemma":
" I wistfully think about some day having a flat-headed one......
And then there were three......That's how it starts.
If you are not in a dulcimer group, try..."
@robin-thompson
• 4 days ago
• comments: 19
Posted a new Comment on @intelisano:
Posted a new Comment on @intelisano:
"It worked!
Yes, string changes on the KYoung instruments are not as easy as on some dulcimers yet his instruments are wonderful. You may need a helper on..."
@ken-longfield
• 4 days ago
• comments: 19
Posted a new Comment on @intelisano:
Posted a new Comment on @intelisano:
"Use a photo editor to shrink the size of the photo. A good size would 8 x 10 inches. I can easily do that on my MacBook Pro using the Preview app. I would..."
@ken-longfield
• 4 days ago
• comments: 19
Posted a new Comment on @intelisano:
Posted a new Comment on @intelisano:
"Welcome to FOTMD, Intelisano. It's good to have you aboard. You have a wonderful dulcimer in that Keith Young instrument. You're starting off on the right..."
@greatlakes73
• 4 days ago
• comments: 0
Created a new forum topic "2 dulcimer dilemma":
Created a new forum topic "2 dulcimer dilemma":
"Hello all,
I have a very "spoiled" problem! Just starting out on the dulcimer with an hourdrop all-walnut model by Warren May that I bought from him last..."
@robin-thompson
• 4 days ago
• comments: 19
Posted a new Comment on @intelisano:
Posted a new Comment on @intelisano:
"Hi and welcome to FOTMD! Keith Young made wonderful instruments so you've got an instrument from a master luthier. Is it possible you can re-size your..."
@mike59
• 4 days ago
• comments: 0
Posted a response to "WTB: glass noter":
Posted a response to "WTB: glass noter":
"Thanks Ken for your reply - I can easily obtain bottleneck type slides here where I live, so it's the rod I'm looking for.
Dusty, this is terrific news! I'll..."
@intelisano
• 4 days ago
• comments: 19
Posted a new Comment on @intelisano:
Posted a new Comment on @intelisano:
"Photo is apparently enormous. I'll try again. "
@intelisano
• 4 days ago
• comments: 19
Posted a new Comment on @intelisano:
Posted a new Comment on @intelisano:
"Hello all. I’ve joined this site hoping to get advice. I’ve been given a Keith Young dulcimer. I’d love to learn to play it, but it needs new strings and I..."
@pierre-yves-donnio
• 4 days ago
• comments: 0
Liked a forum discussions item created by @robert-owens: Help with restoring a 1962 Arthur Dixon dulcimer?
Liked a forum discussions item created by @robert-owens: Help with restoring a 1962 Arthur Dixon dulcimer?
@strumelia
• 4 days ago
• comments: 0
Posted a response to "Help with restoring a 1962 Arthur Dixon dulcimer?":
Posted a response to "Help with restoring a 1962 Arthur Dixon dulcimer?":
"This is a great thread, and what a great old dulcimer! Beautiful wood too.Just my 2 cents, but for a fragile old dulcimer like that at 28" scale length and a..."
@robert-owens
• 5 days ago
• comments: 0
Posted a response to "Help with restoring a 1962 Arthur Dixon dulcimer?":
Posted a response to "Help with restoring a 1962 Arthur Dixon dulcimer?":
"Okay, great, thanks! You're certainly a wealth of info about all of this...glad we have connected. I will follow your advice and try those string gauges, and..."
@robert-owens
• 5 days ago
• comments: 7
Posted a new Comment on @robert-owens:
Posted a new Comment on @robert-owens:
"Thanks Ken! You've been a big help already.
I wish I could make it to Hindman next week, but it's not looking like I'd be able to on those dates. If that..."
@ken-longfield
• 5 days ago
• comments: 7
Posted a new Comment on @robert-owens:
Posted a new Comment on @robert-owens:
"I'll be in Hindman, KY next week, April 24, 25, and 26, for the Hindman Dulcimer Homecoming. I guess that's about a 3 1/2 drive but if you can get down..."
@ken-longfield
• 5 days ago
• comments: 0
Posted a response to "Help with restoring a 1962 Arthur Dixon dulcimer?":
Posted a response to "Help with restoring a 1962 Arthur Dixon dulcimer?":
"With a 28" length I think you would do well with 0.012 for the melody string (the one closest to the player), the same gauge for the middle string, and 0.022..."
@ken-longfield
• 5 days ago
• comments: 7
Posted a new Comment on @robert-owens:
Posted a new Comment on @robert-owens:
"Well, Robert, I'm usually here welcoming people but I responded to your forum before coming here. Welcome to FOTMD. You are fitting right in. I've enjoyed..."
@robert-owens
• 5 days ago
• comments: 7
Posted a new Comment on @robert-owens:
Posted a new Comment on @robert-owens:
"Thanks very much! This is a great resource...I've already gotten some very helpful replies from 3-4 different people...already on my way to getting it back..."
@richard-streib
• 5 days ago
• comments: 7
Posted a new Comment on @robert-owens:
Posted a new Comment on @robert-owens:
"Welcome Robert Owens to Friends of the Mountain Dulcimer. Glad you joined. How special to have and to fix up that old dulcimer that has been a part of your..."
@robert-owens
• 5 days ago
• comments: 0
Posted a response to "Help with restoring a 1962 Arthur Dixon dulcimer?":
Posted a response to "Help with restoring a 1962 Arthur Dixon dulcimer?":
"Thanks Ken. Well, I don't know if that's more than I want to know, but it's more than I knew I needed to know! So, I've measured the vibrating string length..."
@robert-owens
• 5 days ago
• comments: 0
Posted a response to "Help with restoring a 1962 Arthur Dixon dulcimer?":
Posted a response to "Help with restoring a 1962 Arthur Dixon dulcimer?":
"Thanks Nate. I have various hardwoods as well as bone blanks for guitar saddles & nuts that I could maybe use. I also have the reamers, which I use for..."
@ken-longfield
• 5 days ago
• comments: 0
Posted a response to "Help with restoring a 1962 Arthur Dixon dulcimer?":
Posted a response to "Help with restoring a 1962 Arthur Dixon dulcimer?":
"Well, in discussing the tuning pegs I forgot all about your other questions. It does look like the nut is made of metal. Perhaps it is a piece of sheet metal..."
@nate
• 5 days ago
• comments: 0
Posted a response to "Help with restoring a 1962 Arthur Dixon dulcimer?":
Posted a response to "Help with restoring a 1962 Arthur Dixon dulcimer?":
"On one hand, if you particularly wanted to install a "zero fret" made of metal that is an option. Common materials for dulcimer nut and bridge are very hard..."
@dusty
• 5 days ago
• comments: 0
Posted a response to "WTB: glass noter":
Posted a response to "WTB: glass noter":
"Mike, I have one of the Hall brand pyrex glass noters that Amazon used to sell. Here is the listing explaining that it is no longer available: Hall dulcimer..."
@robert-owens
• 5 days ago
• comments: 0
Posted a response to "Help with restoring a 1962 Arthur Dixon dulcimer?":
Posted a response to "Help with restoring a 1962 Arthur Dixon dulcimer?":
"Hey fellas. End of the day update here...
I appreciate all of you who have weighed in to help me solve this puzzle.
So, I was able to remove the tuners, by..."
@ken-longfield
• 5 days ago
• comments: 0
Posted a response to "WTB: glass noter":
Posted a response to "WTB: glass noter":
"Mike, are you asking about a solid glass rod or a cylinder that you put your finger in like you would use for playing slide guitar? If it is the former, do a..."
@mike59
• 5 days ago
• comments: 0
Created a new forum topic "WTB: glass noter":
Created a new forum topic "WTB: glass noter":
"If nobody has one, or is not interested in selling, the big question is: does anyone still make them? Amazon has some "no longer available" items but that's..."
@ken-longfield
• 5 days ago
• comments: 0
Posted a response to "Help with restoring a 1962 Arthur Dixon dulcimer?":
Posted a response to "Help with restoring a 1962 Arthur Dixon dulcimer?":
"I decided to look at some Dixon dulcimers. Here are links to two photos of Dixon dulcimers:..."