The noise from straps might be as much a function of the instrument's finish as it is the strap itself. My main dulcimer strap makes no noise on most of my dulcimers, but the one I'm playing right now has all kinds of squeaking from both ends. If I want to record something I have to shove a piece of cloth in between the leather strap and the dulcimer to quiet the noise.
My stake make a lot of noise while I play. Are these straps quiet?
I don't notice any noise from these straps, but then again, I've never noticed a noise from any of my straps. Once I get situated to play, my dulcimer doesn't move much. I think it comes down to technique. Being these straps are 1" wide vs 2", I'm guessing a narrower strap might help, if you get noise when you play.
My stake make a lot of noise while I play. Are these straps quiet?
I had one of his dulcimers for a while. Nicely made, great intonation, beautiful tone. You have a gem, enjoy!
Wow. That cleaned up really nice. The wood is beautiful whatever species it is.
All - Thanks for the information. Here's a few more pictures for your enjoyment - taken after I clean it up a little.
@ken-hulme - thanks for all the information. I joined the beginners group. I'm always up for a new adventure, so this should be fun.
@john-c-knopf - It doesn't show up in the photos well, but the fret board and the sides have some streaks of brown that have a red hue when the light reflects off it.
I agree with John that the wood looks like cherry which is one of the woods Lazenby used. However, this dulcimer was made in 1980 according to label and I think I might have darkened up by now. At any rate it is a beautiful instrument. Enjoy.
Ken
"The dulcimer sings a sweet song."
That is a beautiful dulcimer @deweylandrum . What a wonderful gift from your father. Best wishes as you learn to play. You have come to the right place to get your questions answered.
Our cat Sheba (aka BooBoo) carefully wrapped herself up in the top sheet like a burrito this morning, while I had the comforter and bedspread off being washed...
Of course the whole reason I had to take off the blankets to wash them was because 'someone' hurled up a big hairball on the bed when we weren't watching. Cats. This is why we can't have nice things.
BooBoo hiding her shame...
Dewey, the wood looks like cherry to me. It's an orangy color like cherry, and if it IS cherry, it'll slowly turn a beautiful rich red over the years.
Dewey -- If you join the Beginners Group as Strumelia suggests (you have to join the Group to see more than a question or two, and to create posts), one of the first things you'll see there is an essay I wrote years ago for beginners like yourself called I Just Got A Dulcimer, Now What? which is an illustrated glossary of terms -- so we all speak the same jargon -- like nut versus upper bridge and fretboard versus neck (dulcimers don't have a neck). It also has answers to many beginner questions about the tuning, playing, care and feeding of your new acquisition.
With your 28-5/16" VSL compared to the Roosebeck's 25.5", you should be alright in using them. The String Choice Calculator suggests .009, .012 and .019 wound for strings where the Roosebeck set has .012, .014 and .022 strings. The calculator usually presents "light" gauges and we often suggest going up one or two gauges from the calculation.
However, I recommend buying at least one more complete set of strings (just to have extras around should you break one during tuning). You can probably find single strings at a local acoustic music shop. I would suggest buying .011. .014 and .021 wound strings. While you're at the store, I also suggest picking up a tube of Peg Dope, a liquid used to help wooden tuning pegs hold their tuning. Not something you use very often, but worth having should you need it; and head-and-shoulders better than any home remedy.
When you get strings and are ready to tune, start a new post over in the Beginners Group, and we'll talk you through the process.
Great photos of the label! Sure looks like Lazenby's name to me.
Dewey you have a beautiful dulcimer that looks to be in perfect condition. How wonderful that it was your father's dulcimer. If I were you I would not hesitate to try and contact Bob Lazenby with questions about your particular dulcimer- I'm sure he'd be tickled pink!
Do join our Beginner's Group which is the perfect place to ask all your questions in figuring out how to tune, how to play, etc. 
It's difficult to get everything into a single photo, but here are cropped pieces to try to give the best views.
From inside nut (I had to look up what the "nut" was, I was thinking it was probably the thing between the instrument and the chair, but then figured out it was the upper bridge)...any way, inside nut to inside bridge is 28 5/16 inches. Seems like a fairly odd size compared to what I've read about.
Beautiful instrument. I'll let others speak to the wood.
The 5 strings are arranged as two pairs and a single. The pair closest to you are the Melody strings. The outer pair are the Bass drones, and the single is the Middle Drone.
Since the dulcimer is a vintage design without the 6+ fret common these days, I would suggest you learn to play either Melody-Drone or Noter & Drone style, where you pick out the tune on the Melody strings, and the others drone along as accompaniment. Trying to play chords without the 6+ fret you may find challenging.
Tuning
Those Roosebeck strings have 1 wound bass string and 4 plain steel strings. The two thinnest -- .012s will go on the melody string pair. The wound bass string will go on the outer side of the Bass string pair. The other two will go 1 as the Middle Drone, the other as the inner Bass string.
However, those strings may not be appropriate for your dulcimer. The gauge of the string depends on both the open note you want to tune to and the VSL -- the distance between the nut and the bridge. The Roosebeck 5-string dulcimer has a 25.5" VSL, if your dulcimer's VSL is much longer -- say 27+ inches, the Roosebeck strings may break if you try to use them.
If you tell us the distance from the inside edge of the nut to the inside edge of the bridge, we can use a string calculator to see if they will work. If not, you'll have to buy five single strings or a dulciemr set of 4 strings plus a single to make up your own set.
All that aside. Two good tunings would be DdAAA or DdAdd, where d is an octave higher in pitch than D and the As are 5 notes higher in pitch than the D --- D..E..G..G..A If you want to tune a bit lower, then CcGGG or CcGcc would be good choices.
Dewey, if you could get a clear photo of that label, someone on here might be able to tell you for sure if it was made by @bob-lazenby .
It sure is a beautiful dulcimer!
I'm completely new to dulcimers and am attempting to learn to play this instrument.
I'm sure Mr. Lazenby get's tired of people asking him questions, so I won't ask it directly. Maybe somebody else knows. This dulcimer was given to my by my dad. He didn't know much about it other than he got it on a trip to Tennessee and enjoyed it over the years. He said he watched a guy making instruments through a window and he bought this one. There is a music store tag inside it from Pigeon River Music with an address of 101 Marshall Street, Pigeon Forge, TN and a phone number that is no longer in service. There is also a sticker that is coming lose and is smudged that looks like it says "Bob Anne Lazely" in cursive blue ink with a date that says 1/(not decernable)/80 in the same blue ink. The instrument is made completely of a blond type wood, had 5 wooden tuning pegs, three nails for the string loops, lower "F" style holes at the bottom, and two round holes at the top of the body. After a little research, I concluded that it was probably Bob Lazenby that made the instrument based on the Pigeon River Music store. After finding his profile on this site, the "Anne" makes more since to me.
The questions: 1. What kind of wood is this probably made from? 2. I ordered a set of Roosebeck 5 string dulcimer strings. What do I tune them to? I can find what you tune 3 string dulcimers to. Any other info about this dulcimer (model, tuning, etc) would be greatly appreciated.
Best Regards,
Dewey Landrum
Hi. My name is Dewey. I found this site doing some research on a dulcimer my dad gave me. He's in his late 80s and doesn't hear well anymore, so he gave it up.
Here's a link to one of my blog posts that might be helpful in figuring out how to tune your dulcimer:
https://dulcimer-noter-drone.blogspot.com/2010/12/what-notes-do-i-tune-my-strings-to.html
In the blog post there's a link to a real online keyboard where you can HEAR the notes D3 and D4 for example. You'll want to e sure to tune to the notes in the correct octave so you don't break your string.
Venni, how to start will depend on a few things, most notably whether you have any experience playing music.
I would suggest you start by tuning to either DAA or DAd (check out Get Tuned for help) and then just trying to pick out melodies on the melody string (the string closest to you when you lay the instrument on your lap.
And yes, the Beginner Group that Robin points you to is the place to start here at FOTMD.
There is tons of beginner stuff available here at FOTMD and elsewhere online, and there are also lots of beginner instruction books available. If you want formal lessons to help you get started, there are lots of folk who give lessons via Zoom or similar platforms. But nothing can beat just exploring the instrument on your own and watching lots of videos of other people playing.
I had no heard of John Frazier before reading your post. I have been unable to find out anything about him. I'll be interested to see what others come with about him.
Ken
"The dulcimer sings a sweet song."
Its always nice to learn of different builders. I have not heard of this one. Let us know when you find out more information.
Kevin, I am not familiar with the maker. Perhaps, over time, you will be able to learn more about Mr. Frazier and his instruments.
He describes what musicians do as delivering 'the pleasure of sound." That's a nice concept.
Some great points made, Robin!
Thanks for the responses and insight into this. I will tune the strings according to the meter and then just tweak it to my ear.
Well, I just tested 8 dulcimers of various VSLs and tunings, and I can say YES -- at the very end of the sustain, the needle wiggles a little to either side of 'spot on', usually less than 10 cents worth. I suspect it's an artifact of the volume of the sustain falling off as much as anything.
Leny-sue, that's what is called "decay" of the note, and is normal. It tends to be more noticeable on strings at looser tension and also wound strings, and more so when the strings are plucked hard. Most of us pick the first part or middle part of the sounding note to tune by, not the ending 'decaying' tone.
Hi Folks. I have a question concerning my dulcimer strings fluctuating in pitch while tuning with an app on my mobile device. Is it common for them to "go flat" while sustaining after plucking? The pitch actually moves lower then sometimes back to nearly what it should read on the meter. Is the sustain suppose to remain constant to the end? Thanks for your input.
I think the basics of what Chick Corea had to say about music applies to porch players, too, in many ways.
Venni that's good news for sure. I hope you've been looking in the Beginner Group here to learn about how to tune it for example... lots of good starting out info to be found there!
I hope it arrives safely and brightens your day!
That's an original, Dusty, except from the quote of Vocabulary.com.
By the way I have painted a turtle to go along with this and I will post it
under photos soon! Take care, John
Thanks, John. I like that a lot. Did you come up with that yourself or is that some ancient Chinese saying or something?
