Forum Activity for @strumelia

Bowed Psaltery

Adventures with 'other' instruments...

Suzanne,I think you should talk to our member Tish: http://mountaindulcimer.ning.com/profile/TishWestman She and her husband make wonderful bowed psalteries, and they make smaller ones for beginners as well. http://www.westmaninstruments.com Also, go have a look at Donna Malus' whole other online community just for bowed psalteries! : http://psalterystrings.ning.com/ I don't think you will have a lot of luck just walking into a music store hoping to find one. they are not that common.So, Donna and/or Tish are both very knowledgeable, and they are both members here. They can give you some excellent guidance on getting your mother a well made and lovely psaltery that likely won't break the bank. :)

Bowed Psaltery

Adventures with 'other' instruments...

I just wanted to mention that one of our members here, Donna Malus, has started a new NING network community just for the bowed psaltery, located here: http://psalterystrings.ning.com/ Great going, Donna! :)

Bowed Psaltery

Adventures with 'other' instruments...

I practiced again last night after not playing for about 5 days. I noticed a definite improvement! I didn't have as much trouble changing intervals between 3rds and 4ths, which seems to happen a lot in my medieval-y tunes.

Bowed Psaltery

Adventures with 'other' instruments...

Bowed psaltery players are welcomed to join the Rosin the Bow group here at FOTMD. Please feel free to come share your music, ask questions, answer questions. . .Robin

Bowed Psaltery

Adventures with 'other' instruments...

Anthony Fama said:

I feel truely blessed to be able to get together almost every Wednesday & play music with my other psaltery friends.

Ooooh, I would love that too! Your psaltery is very very beautiful!Have you ever been able to see or try a 3 octave psaltery? Are they around? Are they too awkward to play?

Bowed Psaltery

Adventures with 'other' instruments...

Well Walter that is a reallly beautiful psaltery you made...impressive!Today I practiced again. Every time i practice I can hear myself get a tiny bit better. I usually practice for about 20 or 30 minutes.Today I set aside several hours and put all new strings on my 12 yr old B.psaltery. That's 32 strings I changed! ((whew)) But the old ones were all too thin (.009) and they were rusty. It just deserved new ones. The new ones were in three gauges- .010, .011, and .012 for the low strings. James Jones the maker suggested that and sent me a tuning chart to know which strings used which gauges.Frankly, I don't hear a huge difference, but nice shiny new strings are nice to have on anyway. ;)

Bowed Psaltery

Adventures with 'other' instruments...

Here is mine, made by James Jones of VA, 2 2/1 octaves with a redwood top:

Bowed Psaltery

Adventures with 'other' instruments...

I just dug out my 12 yr old bowed psaltery last week and am starting to learn to play it now. I wanted to start this thread as a place where others could talk about their bowed psalteries too! I would love to hear about and see other people's BPs. :)
updated by @strumelia: 02/18/19 10:43:53PM

Info and diagram very helpful. Thanks for posting.

Sam

I saw a post on u tube showing how to form a loop. they had an eye hook on the end of a file handle or dowel and demonstrated forming a loop.

Not to keen on the loop through method, though I've used it often enough, it's seems to create a weak point where the string often breaks.The ferrule is invariable made of brass and will crack up and drop out if you squeeze it with a pair of pliers.Be careful doing this that you don't put any pressure on the string itself or scratch it with the jaws of the pliers. I use flat jawed pliers(rather than the more usual serrated ones) so that tape trick would be a good idea.john p

I had a string break at last night's session so I tried the "loop through ball" as a quick way to get a new string on (I only had ball end strings available). It worked! I had the string on and stabalised at pitch by half way through the next tune.

The looping through the ball does work, but if you have one of the dulcimers that was made using a dowel for a string holder, the dowel can get rather crowded with 4 ball ends. This is especially true when you break a string and want to make a quick change. You may have to really work to figure out which string needs to be cut off, or you'll end up with 5 balls on that peg.Many makers use metal pegs that are good for holding both ball and loop end strings. You might even be able to find a luthier who could put those on for you if you have large headed nails for string holders that the loop won't fit over. Robin Clark said:

That "loop through the ball" system just sounds way too simple a solution to work !!!! - I've must give it try as it would make life so much easier! My only concern (untested) would be how well the string would stabalise and hold pitch. But if it does work - well, problem solved!

I've tried lots of different methods of removing the balls - twisting, cutting, smashing and not had much success. The quickest has been to simply cut the ball off and re-wind a loop (then put a plaster over the holes in my fingers!)

Wray said:

Have you tried inserting the string end through the ball to make a loop end (of sorts) out of a ball end string?
Also, if you unwind the string just a smidge you can take the ball out without having to cut the ball.You might have to hold the string above the ball very lightly with a pair of needle nose pliers to be able to unwind it. It only takes a turn or two.

That "loop through the ball" system just sounds way too simple a solution to work !!!! - I've must give it try as it would make life so much easier! My only concern (untested) would be how well the string would stabalise and hold pitch. But if it does work - well, problem solved!I've tried lots of different methods of removing the balls - twisting, cutting, smashing and not had much success. The quickest has been to simply cut the ball off and re-wind a loop (then put a plaster over the holes in my fingers!) Wray said:

Have you tried inserting the string end through the ball to make a loop end (of sorts) out of a ball end string?
Also, if you unwind the string just a smidge you can take the ball out without having to cut the ball.You might have to hold the string above the ball very lightly with a pair of needle nose pliers to be able to unwind it. It only takes a turn or two.

If you shop on line "Just Strings" has loop end strings in almost all gauges. You don't have to buy set packs of Dulcimer strings.
updated by @folkfan: 02/12/16 02:45:15PM

Thanksgiving: Old Blue

OFF TOPIC discussions

Randy, thanks. My grandmother -- a fine Sacred Harp singer -- told me once that my singing sounded like somebody calling hogs and that my guitar sounded like the hogs answering back. This was done in a good spirit as a way of suggesting that I ought to sing more church music and less Hank Williams and Carter Family.I just got back from Georgia. One of the great things about having grown up there is that Georgia is a good place to get back from.And yeah, coonhounds aren't for everybody. Just ask my wife. People say they're dumb, but I think that they're smart enough to know what they can get away with.

Thanksgiving: Old Blue

OFF TOPIC discussions

Ken..Our neighbor has a string of coondogs, mostly Redbones...raises them. When we bought this place 15 yrs ago we wanted to build a shop for our construction biz and maybe build a house later. At first I didn't wanna build the house b/c those coondogs were pitchin a racket all the time....neighbor lives about 1/3 mi. away....but I started liking their sound. I don't think he has a many as he used to & is too old to hunt anymore.When we were in high school my brother dated his daughter & went hunting a few times with him & I wanted to go but unfortunately the relationship didn't last.... : )....When you put up your tunes on ezfolk a while back I listened to them and thought they were nice but somewhat...uh....unremarkable....sorry....but after you put up your 1st shape note tune, which I took to right away, I went back & listened to the other tunes and....what happened?!....they are great!Maybe it took me a while to get used to your voice...: )....like it took me a little bit to start liking the sound of those coonhounds.I love the way you play & sing them tunes.

Thanksgiving: Old Blue

OFF TOPIC discussions

Bobby, thanks. My family has raised blueticks since I was a kid. I grew up coon hunting, but am too old and too hippy to do it anymore. It's a young person's sport. After my grandfather got too old to run with his dogs, he would still turn them out then sit in his truck and listen to them, but those days are over, at least in Pennsylvania.I've had four blueticks over the years. Sweet girls, all of them - never had a mean one. Never seen a mean one actually, as far as I know. Now Catahoulas, that's a different story.Coot, Roadie's surviving sister, will be our last coonhound. We've got two Great Pyrenees livestock guardian dogs - totally non-crazy, solid citizens - and any future dogs are likely to be Pyrs or Border Collies, given our ages and the direction the farm has taken in recent years.It sure is quiet around here without Roadie. She was one howling dog!

Thanksgiving: Old Blue

OFF TOPIC discussions

Thanks Robin and Andy. Dogs are one of our greatest blessings, I think.Robin, if that's how it works, and it may well be, I guess Roadie's off to the land of three-legged possums.

Thanksgiving: Old Blue

OFF TOPIC discussions

Ken,When our first old dog, a beagle mix named Benny, died, we said he went to the land where the rabbits were slow and the females were short.I'm sorry Roadie died and it's good her passing was a peaceful one.

Thanksgiving: Old Blue

OFF TOPIC discussions

Aw thanks folks for commenting.Roadie was one wild, howling, goofball dog She could make anybody laugh.

Thanksgiving: Old Blue

OFF TOPIC discussions

Sorry to hear about your friend and companion passing away. But at least it was a peaceful end, and she was at home with you when she had to go.

Thanksgiving: Old Blue

OFF TOPIC discussions

My condolences. Sounds like she had the best life a dog could ever wish for. And what a beautiful photo!We lost two of our beloved kitties this year, I know it's sad missing our sweet animals when they go.Have a loving warm holiday while thinking of Roadie and her happy life.

Thanksgiving: Old Blue

OFF TOPIC discussions

Roadie, our old bluetick coonhound, crossed over Monday afternoon. We had a lot of great years, and I'm sure thankful that we had that time together.Coonhounds are crazy dogs, blueticks are crazy coonhounds, and Roadie was the craziest bluetick coonhound I've ever known. My grandfather, George Washington Rice, told me, "Blueticks in the house has been the end of many a marriage", and old Roadie sure put that one to the test. I'm grateful to say that we were up to it.Roadie had never been sick a day in her life until Sunday, and she seemed only mildly ill then, just some stomach trouble. She looked OK on Monday morning, drinking water, but not hungry. She died peacefully in her sleep Monday afternoon.We'll have a good Thanksgiving, and I hope you do too. No need to feel sad about Roadie. She was all dog and she knew how to have a good time.Here's a song about a bluetick coonhound, Old Blue Ken
updated by @flint-hill: 02/16/19 03:34:09PM

Diane, A lending library for instruments would be neat!

Hi, Diane!I am a fan of a three-row chord set-up, majors in the middle, sevenths toward the treble, minors toward the bass. I have two chromatic 'harps-- one with 21 chords and one with 15. My 15-bar 'harp is does not completely comply with the majors in the middle, sevenths on top, minors on bottom but the arrangement demonstrates a logical compromise because it's based on the circle of fifths.Sevenths toward the treble side: C7, G7, D7, A7, and EMajors in the middle: Bflat, C, G, D, AMinors toward the bass side: Fmaj, a, e, b, fsharpYou can play most of an A chord by pressing A7 & Aminor at the same time; I'd rather have an A bar, though.The disclaimer to all this is I am far, far, far from expert on autoharp. I'm a strummer and by-ear player. Autoharp music theory discussions cause my eyes to glaze over. A weakness on my part that I'm willing to live with. LOL
updated by @robin-thompson: 01/31/16 01:28:54AM

I'm a bit late coming in on this thread looking at how long it has been running!!!!

In my opinion, the Jeffrey's I have (standard 3 string 70s version)is a great little workhorse. It has a lovely articulated tone - and his scale is pretty sweet (and much nicer to play than the modern curse of equal temperament )

There are just soooo many old dulcimers with a flattened 3rd and flattened 6th of the scale that we can no longer ignore that this fretting pattern is the sound of theearly instrument. It simply requiresus to re-learndifferent/earlier playing styles to get the best from these wonderful instruments. After all, these more natural fretting patternsproduced the sounds you would have heard ringing around those West Virginia Hills

Last week whilst sleeping I was woken by a strange sound coming from the corner of my bedroom. It was the single walnut dowel string post on my old Jeffrey's popping out. Lasted 42 years. Installed a new dowel and I'm good to go for another 42... Bob.

After a long interval I've just caught up again with this discussion. I'm another happy (UK) owner of an AWJ dulcimer, which I bought very cheaply on British eBay 3 or 4 years ago.I would counsel against changing the fret pattern to equal temperament. pristine2 is someone I greatly respect, and whose opinions are always valuable. BUT I think the plaintive qualities he loves in AWJ's dulcimers derive partly from the distinctive non-equal temperament. My advice would be to leave fretting alone, enjoy its lovely melody/drone qualities, and accept that to play more chordal music you need to turn to another dulcimer!

To the list of tunings which AWJ's dulcimers really, REALLY like I would add DAC or similar (Aeolian tuning).

A major cause of premature decay & death among vintage dulcimers is dessication. Long periods of dryness is particularly damaging. It will cause cracks, warp the fretboard and ruin the finish. Vintage mountain dulcimers sourced in the south central and southwest US usually show signs of dessication, but I've seen this damage on instruments from just about everywhere.

In the UK, dry air isn't going to be much of a factor except in winter when you have the heat on. Then you should really keep tabs with a cheap hygrometer. A relative humidity (RH) of 40%-65% is quite safe. If you're getting readings of 35% or less, your instruments ARE at risk. If they are already dry, 55% is a good number to re-hydrate them gradually over a couple of weeks.

I keep my US instrument room, which is really quite large, at between 42% and 51% during the winter using a console humidifier (placed at one side of the room, so the other side stays a bit drier). During the winter I have to add water to the tanks pretty much every day. My instruments are happy. That goes for all my wooden instruments, including my piano, which stays in tune much longer properly humidified.

Damp air can also damage your instruments, but is really less of a concern in temperate climes (unlike Hong Kong, where 95% for weeks on end is common). Dehumidification is a lot more expensive than humidification, too.

Totally agree with you Mike, with the rider that even when attending festivals, where accomodation was sometimes an oven of a tent, tho' more often one which was distinctly damp !!!, I have never felt the need to offer any special provision in the way of protecting instruments I had with me, and so far as I can see, this has in no way affected any of them adversly. (Well, perhaps sometimes just a suggestion of rust on the strings on my hammered dulcimer.............. lol)

John

Glossy Polyurethene/two pack finishes !!!!!!!!!!!!!!!!!!!!!!!

lol, tell me more?

JohnH

I'm sure Richard's right about the environment in which you keep the dulcimer being at least as important as what you put on it. Fortunately/unfortunately, I live in a humidity uncontrolled environment, simply because the house is so old and decrepit...most of the external environment seeps in regardless! Dulcimers seem to love it....

I seem to recall my own Jeffreys having very a very matt, dry-looking finish - which I suspect is pretty typical of the era before glossy polyurethane/two pack finishes. I'm not sure I'd necessarily put anything on it...with the exception of the fingerboard, where it really ought not to be dry. I use some mysterious oily preparation invented by the guitar maker Gurian in the 70s...and there won't be any more when it's gone after 40 years! But lemon oil also seems fine...

Before applying anything to the surface, I would place the instrument in a humidity controlled room for an extended period of time. Above 50%, but less than 60%.

R

If you want to play in DAG, I'd suggest a 013 in the melody course. It will hold its pitch much better, and will be a bit louder, too. Same gauge will do fine in DAA, but will be a bit too stiff for DAD.

For what it is worth, Jeffreys probably shipped his completed instruments in CGC or CGG. I have one 1991 Jeffreys that came in the original still-sealed box 18 years later. It was in CGC, and very nearly in tune!

To replace the fret pattern, luthiers usually plane down the board and use an overlay thinned to match the original height. You can decide to keep the original fret remnants underneath visible on the sides, or not. You can also plane down the nut and bridge in proportion to the new board surface, and skip the overlay.

R

Thanks for posting those snaps of your AWJ. It's a very early specimen, I'd say, probably from the early 1960s, before he adopted the scroll he seems to have used always thereafter. I assume there is no date written to the left of the instrument number?

I looked inside my 1972 model it says JR. coincidentally I just started building a replica of my Jefferies. Here's the lumber pile that in a month will become another dulcimer.. Bob

Mike

Good to hear that you have secured an instrument you love - with all its quirks! If you open my catalogue of dulcimers on the Nonsuch site and go to p14 ( http://dulcimer.org.uk/for_sale.html ), you will see a Jeffreys, together with some text which fills out a little of the detail given by Richard above.

'Fraid it's not for sale, having gone to N Wales back in August. there are others I know in the UK. I'd echo what Richard said about the tone and about the odd intonation. Sounded lovely in DAA or DAG however.

Do get in touch if you need anything, from new tuning pegs to capos...or just a chat!

All the best.

Geoff

Hi

I still have four AWJs (maybe even five, if I can find one that I've lost track of). I've handled maybe 10 in total. The earliest I've seen (and happen to own) is from the late 1950s, with half-width frets. It is the only half-width fret Jeffreys I know of. The rest range from 1962 to 1991, all with full-width frets. I'll be selling one or two, so I'll be writing detailed descriptions over the next few weeks. I'd be tickled pink to see them move at $400, but I'll probably set the reserve in the mid-200s.

Since you have already swapped out the tuners (with something very nice, I might add), and if you're still ready to invest in the instrument, I suggest you completely replace the existing fret pattern. You might even consider adding extra frets. From what I've learnt about the builder, I think he would applaud you (though I also think it important to preserve at least a few examples of unmodified originals, too).

Your impulse to preserve the integrity of the instrument is the correct and ethical one. Invasive surgery on a vintage instrument is a drastic course of action, to be sure. But occasionally, it is the right course, provided there are very good reasons, you are conscious of what you are doing, and you are willing to write about it. Documenting a change usually legitimises it, from history's point of view. Moreover, Jeffreys built in sufficient quantities (I can only guess about 2000 pieces in total) to warrant some experimentation. They are fine musical instruments, after all, and should be used as expressively as possible. That sometimes requires a radical change.

There are three or four people in the country capable of doing this for you, and the cost would be between $100 and $200, depending on which one you use. I hope to be one of those people soon, but I don't yet have the skills developed. I had Ben Seymour re-fret a late model Jeffreys for me last year, and I am very pleased with the results. Ben was careful to match the existing fret wire, and maintain the feel of the action. There are others capable of good work, too -- PM me for some suggestions.

Best,

Richard

Just one fellow, AW Jeffreys Jr of Stauton Virginia, whose name is often misspelt.

I spoke to his son a couple of years back. He could not enlighten me about the numbering system, but Jeffreys clearly used more than one. On the AWJ instruments I own, the numbers are not in sequence with the dates on the labels.

Jeffreys started building sometime around 1958, and his last instruments are dated 1991. Very few changes during the entire period, though he added a zero fret at some point in the late 1970s.

They are wonderful, very sweet-sounding dulcimers. They are not, however, in equal temperament. He instead used a much older fret pattern, probably left over from half-width-fret dulcimers, that yields a beautifully intoned scale on the melody course but doesn't accommodate chording very well.

AWJs don't sell for a fortune, though I remember one moving on eBay for $400. Depending on age and condition (the really early ones do sell at a premium), you can still pick one up for $125.

Richard