I'm so glad for this post as I've wanted to write about it. (someday I'll learn how to put photos up, I lost the post that someone told me how to do it and so it's late at night and I'll just write about it now without photos.).............ha, that was a long sentence, sorry. Okay, soooooooo I found this kit type of dulcimer ($50.00) that must have been made in the 70's, but it looked pretty good and played sorta in tune and I knew I could fix it. no name or date and the carving for the sound hole was not so good. I covered it up with an abalone heart and made another sound hole that I used to make for my bowed psalteries. It looked good. yep, had a fixed bridge and WAS NOT IN TUNE....so put a piece of wood in that slot, sanded it down and made my own floating bridge. That slot was wayyyyyyyyy off. It might have been in tune when first made, but time and air and other factors change wood. I LOVE A FLOATING BRIDGE....and it's sooooooo easy to tune it. I use these "fix up dulcimers" for loaners as some of the folks that live in Nauvoo, Illinois are missionaries and are only here for one year or two. Follow the video above and that's the way to tune just right. For the builders out there, you don't KNOW where your dulcimers age going to live....wet, dry, humid or whatever.......but all wood moves and it's a blessing to the owner of a dulcimer to be able to tune it with the movable bridge down the road of wood and instruments moving. aloha, irene
I buy 12 packs of bulk strings from www.juststrings.com for $3.62 per package.
One lesson here, Dana, is to have extra strings on hand. Just splurge and buy a dozen each loop end strings for each of your three strings. Then you won't have to fight a ball end string anytime in the foreseeable future.
Well, I finally got that gosh-darn ball to give up the ghost. I first squeezed on it with some jewelry pliars. It was tougher than all get out. Then, I used two hands, squeezed my eyes shut and made a face and it still wouldn't squoosh!
THEN, I went out to my husband's hefty man pliars (heh, heh, I'll show YOU) and gave a hard squeeze (face, mouth, eyes...all engaged). Do you know that little booger wouldn't budge!?
I then decided I was pulling out all the stops and threw some weight into it and finally, FINALLY it dented, I worked another five minutes and it finally succumbed. Seriously, somebody needs to put NASA in touch with this particular string maker.
That done, I spent the next 15 sweaty minutes, tuning. ding, ding, ding, ding, ding DING...DING...DING...I have a B!!! Honestly, it it just me?? 
The bridge was NO problem. It was tuned beautifully open and also on the 7 fret. The subtle smudge was enough of a guideline.
My least favorite part of owning a stringed instrument. Finally got the thing to DAD and after playing four songs, said, "Nah, CGC", and down it went.
You might be able to just put the tip of the string through the hole in the brass and pull it up like a lasso.
Well, the GOOD news is that there appears to be a remnant of some sort of 'stuff' on the wood. I can clearly see where it was. I'll start from there but for now, only have bass strings with that darn little brass nut and I've gone and forgotten how to remove it. Twisting the wire is not helping at all.
I think what you mean is that you have a ball end string but you need a loop end string. If so, gently squeexe the ball with some pliers. Once it has lost its shape it should be easy to remove it, leaving you with a ball end string!
If you have a mark on the wood where the bridge was, you are in good shape. Start there and just fine tune things the way Pristine2 suggests in the video I link to above.
Well, the GOOD news is that there appears to be a remnant of some sort of 'stuff' on the wood. I can clearly see where it was. I'll start from there but for now, only have bass strings with that darn little brass nut and I've gone and forgotten how to remove it. Twisting the wire is not helping at all.
Yes, Blue Lions have floating bridges unless you request otherwise when you place your order.
It's really not that hard to position the bridge, but it does take some practice. Pristine2 has posted a demo of how to do it. Start by putting the bridge where you think it should go. Then tune the middle string and check it at the 7th fret. That should be one octave. If it's off, you have to move the bridge. Keep adjusting the bridge, retuning the string, and checking at the octave until the middle string is correct. Once the middle string is correct, you will adjust the bridge by making it slightly slanted, pointing to the north-east, like a slash on your keyboard. Start working on your bass and melody strings the same way you did with the middle string. Keep in mind that now when you adjust the bridge, you want the middle to stay where it is; you are only adjusting the slant. Perhaps this is better understood in Pristine2's video.
Once you've found the spot for the bridge, you might want to make small pencil marks there to help yourself out the next time you have to do this.
There is probably a mark or faint indentation somewhere where the bridge sat. Hey it could be worse. Imagine a fiddle where the bridge and bridge post falls away. Resetting intonation is real easy don't worry... Robert.
D..D..D..D.... How many times have we told people never take of all the strings at once? 
I'll bet you dusted the fretboard as soon as that last string was off, too -- didn't you? 
Instantly removing almost all hope that there was a mark where the bridge had been.... 
Now yer gonna haft do things the hard way.
One thing that might work would be to call Blue Lion and humbly beg them, on bended knee, 
to tell you how far it is between the inside edge of the nut and the inside edge of the bridge -- in millimeters would be best -- not many measuring sticks are marked in 10th of an inch. Then get out your millimeter stick and measure down the distance twice -- once on each side -- and draw a line between them with a pencil.
Then, just to check how accurately you measured the first time, measure the distance from the inside edge of the nut to the top of the 7th fret. Now go exactly that far from the top edge of the 7th fret towards the virtual bridge. Hopefully the two measurement lines will be really, really close. Set the inside edge of the bridge at the line Blue Lion told you and start stringing -- Bass and outer Melody strings. With your tuner on, play a scale on both strings and check their accuracy against the tuner. If both strings both look and sound good, then add the inner two strings and tighten them.
I believe all Blue Lions have floating bridges.
Well, I'm bringing up this old thread. Today, I put on my big girl britches and sat down to restring my blue lion. Without knowing the bridge was floating, I decided to start with a nekkid dulcimer, and removed all the strings. Off goes the bridge! Rut-Ro. 
So now, it's bad enough I suffer from string-changing-smack-me-in-the-face-phobia, but now....I've got a bridge in my hand saying,"Whatcha gonna do now girlie?!"
Do all blue lions have this?
Lol John...!
Hoosier, it could be that although your action is not too low, maybe your strings are slack enough in your particular tuning to create whisper-fine vibration noises against the frets once released. Try putting a one-step heavier gauge string on. That would tighten the tension a hair and keep the string from vibrating so freely when you remove your finger. This could completely solve your problem- just a slightly heavier set of strings.
Also- are you fretting and unfretting your fingers at a fairly straight down angle? If you fret from the 'side' (like keyboard typing) then you could be very slightly pulling the string when removing your finger, causing that unnecessary vibration. Check the angle of your fretting fingers here .
wow, a whine when you take your fingers off the strings? my wife whines when she see's my putting my fingers on the strings,,,,go figure
John, my husband is a novice level player and he totally cracked up at your comment! Thanks for giving him such a good laugh! (And no, I don't whine when he plays!)
Thanks! Something fun to do while waiting for visits from goblins and gools. 
Totally a last minute thing...
This morning I came up with a version of the theme from "the Munsters" so I thought I'd write it up and post it for download on my webpage. http://www.butchross.com
It's a chord-melody style arrangement but in order to get the weird notes to work, I had to capo at the second fret (and I still had to bend one string). It's a good answer to the question "Why you'd ever want to play in Locrian?"
Anyway, it's available as a .pdf or .tef file (for those of you who have tabledit) it's completely free, you don't even have to give me an email addy (tho' you certainly can if you want to).
Happy Halloween!
I got a sewing machine to make bags for my dulcimers. Found that pant legs from old blue jeans make great gig bags. Robert...
"Cactus picks" have little prickles built into the mold that they make the picks in. Those work well, too.
It'll let you know if your grip on the pick is too hard, too! Drip...drip...drip.... 
I love your enthusiasm ("But oh my gosh, I bet it would be fun.") and it sounds like you've got a lot of great ideas and ways to be really creative with this--plus a really nice machine!
I started sewing at a very early age (made my first dress at age 6) and have found sewing projects to be more frustrating than fun. I love the creativity and the planning stages--and buying the supplies--but things fail in the execution.
I love the idea of culling materials from thrift shops, Goodwill, etc. There are things I have kept because I could use the material from it to make something...but it seems like those projects never get done. You can also get upholstery scraps from places that remake furniture as well as places that make upholstered seats, etc., for RV's and boats.
You may also want to think about making music stands.
I know some people like pick bags to be small, but I like one that is about 5 x 8 so I can also have room for tuners and capos and extra strings--and the string winder!
This is awesome! ~I cannot sew a lick~ Love that this was about sewing and not where human waste goes.... 
I second the sticky pads from http://guitarmoose.com/products - I put one on each side of the pick.
Joe- what an awesome solution. Big win all around!! 
ken is right. don't change the tuners. replacing the wound bass string with a plain one might help.
a few years ago a lady brought me a very low number vintage mc spadden asking that i install geared tuners. instead i called a friend
who worked at the mc spadden shop. i proposed a trade which they jumped on. they have a 50 year old instrument hanging in the shop and
she has a beautiful new mc spadden with geared tuners. it was a win/win
I currently have 5 dulcimers with wooden pegs. It's a fairly simple process once you get used to it. I use Regal Peg Drips from Regal Music Co, in Ely, MN. I've had a 2oz bottle ($5.00) for about 5 years and still have approx 90% remaining in the bottle.
I do the same. That stuff is like gold...works so well.
The problem is that with most geared tuners you have to drill holes for the screws that hold them in place, and that can reduce the value of a collectible instrument.
When??? I guess for me when after building my first dulcimer, a few weeks ago, I found myself prepping wood for 3 more. 
...then there was that other stuff...
Actually, a few years ago we here at FOTMD started our own " You Might be a Dulcimer Redneck " list. Some of it is pretty funny. Some of it . . .
Thank you for remembering Phil, he was a very fun Dulci buddy and is missed.
I can relate to having a dulci in my tiny car and my dog singing to Ole' Joe Clark.
……when Junior counts to ten, 6 1/2 comes before 7
How to tell if you're a dulcimer fanatic
It's now I think about my two month mark at learning to play...I just recorded another short tune today on my penny whistle... Pretty Saro .
James is right, Paula. Sweetwater markets Seagull guitars and the questionable Merlin "stick instrument". There have been a number of complaints about the Merlin concerning less than accurate fret placement and other playability issues.
Sweetwoods Instruments is Harpmaker Dave Lynch, a member here, who makes a wide variety of hourglass and teardrop dulcimers from his highly praised Student Model to his cherry and maple Performance model, as well as pretty much anything you can dream of as a custom dulcimer.
Yes, a lot less. The two were beautiful together. I have a mid-tone G, as well as my sister. I think for the price. I'll just have to get one.
Paula, what you should be searching for is Sweet Woods dulcimers. Sweetwater is an online music store that carries guitars, amps, and a whole lot of other stuff. http://www.sweetwoodsinstruments.com/
